How To Release Zif Connector. As far as im aware it may be called a ZIF socket. Many ZIF connectors have some type of latching mechanism that allows the flex to be inserted and then ultimately clamped down using this latching.
ZIF connector The term ZIF Zero Insertion Force originates from the socket tech-nology of components mainly CPUs. Hold the cable in place then slide the locking bar into the connector on both sides to secure. There are two main ways a display can be connected to a PCB.
With a ZIF socket before the IC is inserted a lever or slider on the side of the socket is moved pushing all the sprung contacts apart so that the IC can be inserted with very little force - generally the weight of the IC itself is sufficient and no external downward force is required.
When releasing a bar use extreme care and a. To solder the new connector on you can use hot air but an iron and good solder paste is usually the best option. Some displays are solder-down requiring fine pitch soldering to connect the tail to the contacts on the PCB. Zero insertion force ZIF connectors are used in several locations in the computer.
